|
|
HHP Quick Check PC QC-800 Barcode Verifier
The QC800 Series Barcode Verifier offers the convenience of simple aim-and-shoot verification through the use of a QC3800V, a customized, IT3800 hand held imager. Quickly perform pass/fail testing of dimensional and format quality parameters like average bar deviation, wide-to-narrow ratios, encodation, and ANSI/CEN/ISO decodability. Also, full traditional and ANSI/CEN/ISO dimensional, reflectance, and format tests can be performed using optional mouse and pen style wands.
|
TECHNICAL SPECIFICATIONS: |
|---|
|
Standard Hardware Configuration | Interface/Input Box, power supply, and choice of mouse scanner, available in aperture sizes of 03, 05, 06, 10, 20 mils, or pen wand in 05, 06, and 10 mils. (Choose visible or infrared for either input device). Plugs into PC serial port.
The QC800 Series Bar Code Verifier offers the convenience of simple aim-and-shoot verification through the use of a QC-3800-V, a customized, IT-3800 hand held imager.
|
|
Optical Input Connector | 9-pin plastic squeeze-to-release male. Allows input from any existing or potential future Hand Held Products interchangeable scanner (excluding laser).
|
|
I/O Connector | 6-pin modular. Allows for I/O communications with computer
|
|
Power Connector | Power jack for powering input device and interface electronics Uses existing Hand Held Products QCAC charger
|
|
Environmental
| |
|
Operating Temperature | 32 to 122° F (0 to 50° C)
|
|
Storage Temperature | 14 to 158° F (-20 to 70°C)
|
|
Relative Humidity | 5% to 95% Non-condensing
|
|
ESD Sensitivity | Withstands 20 attempts to discharge 15Kv to the unit
|
|
Sealability | Meets NEMA 1
|
|
Shock | 3 feet (91 cm) to concrete
|
|
Verification Modes | RL, RD, print contrast signal
ISO/IEC reflectance parameters
Bar/Space dimensional measurement
Average bar growth/shrinkage
ISO/IEC decodability
ISO/IEC 10-scan grade averaging
Wide-To-Narrow ratio measurements
Scan profiles on CRT and printer output
Fixed message length testing
"X" dimension calculation
Scan speed variation indication
Variable or ISO/IEC symbol grade averaging
Storage of scan results and scan profiles
Ability to add notations to scan file for later retrieval
|
|
Programming Procedures | Report generator allows choice of print format. Click directly on a parameter to configure its setting
|
|
Verification Methods | Parameters determined by the ISO/IEC print quality standard or traditional pass/fail criteria
|
|
Result Indications | Visual, using an efficient graphical display, Audible using the PC speaker
|
|
Display Organization | Symbol Grade with Running Average
Scan Grade
Symbology and Symbol Data
Reflectance measurements, including RL, RD, Print Contrast, Rmin/Rmax, Minimum Edge, Contrast, Modulation, and Defects
Format parameters, including Check Digit and Message Length
Dimensional results, including Decodability, Intercharacter gap, Wide-To-Narrow Ratio, and Average Bar Error
Additional results and errors are available in a scrolling list
4 line X 20 character LCD
|
|
Control Panel | 6-button, power, select (4 arrows)
5 tri-colored LEDs
|
|
Symbologies Verified | Code 39 (1 to 49 characters); Interleaved 2 of 5 (2 to 78 characters); EAN/UPC (-A, -E, -8 and -13) includes magnification settings in a maximum of 16 steps consisting of: 80, 85, 90, 95, 100, 105, 110, 115, 120, 125, 130, 140, 150, 160, 180 and 200%; Codabar (1 to 61 characters); Code 128 (1 to 70 characters); Telepen
|
|
Applications | UCC/EAN-128
|
|
Safety/Regulatory | FCC Class A, CE
|
|
System Requirements | Windows 98, 2000, or Windows NT operating system
PC (or compatible) with 486 or better processor
4 MB of RAM
3 MB available on hard drive
Available COM Port (COM 1-4)
Microsoft ® -compatible mouse
|
|
Shopping Cart